Quick Answer: Is Kydex Hard On Gun Finish?

Will hot kydex hurt my gun?

Jac Member.

You only heat the plastic to about 250 or 300 degrees, and it cools quick, so it probably wouldn’t be an issues, but I’ve only done it on metal guns..

Can you heat kydex with a hair dryer?

As with the oven, don’t be tempted to borrow the wifes blow dryer in place of a heat gun. Blow dryers don’t get hot enough, or move enough air to really do a good job with kydex. … If you get a dual mode heat gun, the lower setting will be a lot more forgiving.

What temperature do you heat kydex?

Forming temperatures – Guidelines: (Sheet should not exceed 204°C (400°F). Ideally the core sheet temperature should be within 10°F of the surface temperature. Two sided (sandwich) heaters are recommended above 2.00mm (0.080”) nominal thickness. As KYDEX® sheet is heated, the inherent stresses in the sheet will relax.

Will leather holster scratch your gun?

But the concern towards rub marks is real and can also be found with leather holsters. In fact if a gun is drawn and re-holstered enough times it will leave rub marks on any finish whether it is leather or plastic. … A quality holster manufacturer will design the retention to the trigger and not to the slide of the gun.

What material is kydex?

KYDEX is a line of thermoplastic acrylic-polyvinyl chloride materials manufactured by a company called Sekisui SPI who also own the ALLEN Thermoplastics brand.

How much is a sheet of kydex?

Price: $5.27. This product is cell/smooth finish . 093 gauge Kydex™.

Should I oil my leather holster?

Oiling should not be necessary. Leather holsters are supposed to be a little tight when they’re new. Otherwise, they’ll be too loose when broken in. A thin piece of hosiery over the unloaded gun works best to deburr a new tight leather holster.

Will kydex scratch my Glock?

In theory a kydex holster will scratch your gun the least as a properly made one only contacts the gun at a few points; but even then it is impossible not to rub the gun against the holster body when holstering/drawing.

Is Boltaron better than kydex?

Boltaron will also retain it’s form in higher heat than kydex will. Say you were in Iraq and left your holster sitting on the dash it could easily get hot enough to loosen up the form a bit but boltaron will withstand much greater temps befor loosening.

Is kydex better than leather?

Leather holsters would also lose firmness with time. On the other hand, since it’s a sturdy plastic, Kydex maintains its shape for a long time and has the capacity to resist pressure, dirt, heat, and moisture. Compared to the leather options, holsters made with Kydex are more increasingly customizable.

At what temperature does kydex soften?

165 – 177°C( 330 – 350°F ) for 0.71mm – 1.50mm (0.028” to 0.060”). 182 – 196°C (360 – 385°F) for 1.50mm – 3.20mm (0.060” to 0.125”). 65.5ºC (150ºF) before removing the part from the mold.

What is the best thickness for kydex holster?

08”08” Kydex is the standard thickness for OWB holsters. It is rugged, has aggressive retention, and produces good definition. The majority of holster makers use this thickness for their OWB holsters and double magazine carriers.

Can kydex be reshaped?

If it is true Kydex and you don’t over heat it, yes it can be heated and reshaped.

Who makes the best IWB Kydex holsters?

Our Top 5 Favorite Kydex Holster MakersCYA Supply Company: S&W M&P Shield 9/40 IWB Holster.Outlaw Holsters: Duct Tape Kydex OWB holster.Concealment Express: Concealment Express IWB KYDEX Holster.R&R Holsters: R&R HOLSTERS IWB Kydex Gun Holster.Everyday Holsters: S&W M&P Shield 9/40 IWB Kydex Concealed Carry Holster.

Does kydex wear gun finish?

A properly formed Kydex holster will not wear your firearm. The inside of a Kydex holster is totally smooth. What wears on a firearm is the dirt, dust, debris, etc. that gets stuck in your holster.

Are leather holsters bad for guns?

Although there are some really nice looking leather options for concealed carry, they can be dangerous to use. Over time and use leather becomes softer and more pliable. When you draw your gun from the holster the leather at the top will tend to collapse, making it difficult and dangerous to re-holster your pistol.

Is holster wear normal?

A leather holster will wear surface coat “finish” (not to be confused with the surface treatment of the steel itself– ie the “TENIFER”– before the coat is applied) faster than a polymer one. Leather is abrasive, and can absorb ambient moisture (sweat), and direct contacts more of the slide.

What is the best material for a holster?

Nylon holsters can be incredibly durable. In many cases, these types of holsters are equipped with a shape-retaining stiffener and hook-and-loop fasteners so you can customize the way you carry. You’ll usually find nylon used in OWB and shoulder holsters.